Robust Economic-Statistical Design of Acceptance Control Chart | ||
| Journal of Quality Engineering and Production Optimization | ||
| مقاله 5، دوره 4، شماره 1، شهریور 2019، صفحه 55-72 اصل مقاله (945.86 K) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22070/jqepo.2018.3646.1078 | ||
| نویسندگان | ||
| Samrad Jafarian-Namin1؛ Mohammad Saber Fallahnezhad* 2؛ Reza Tavakkoli-Moghaddam3؛ Mehrdad Mirzabaghi4 | ||
| 1PhD Candidate, Industrial Engineering Department, Faculty of Engineering, Yazd University, Yazd, Iran | ||
| 2Associate Professor, Industrial Engineering Department, Faculty of Engineering, Yazd University, Yazd, Iran | ||
| 3Professor, School of Industrial Engineering, College of Engineering, University of Tehran, Tehran, Iran | ||
| 4PhD Candidate, School of Industrial Engineering, College of Engineering, University of Tehran, Tehran, Iran | ||
| چکیده | ||
| Acceptance control charts (ACC), as an effective tool for monitoring highly capable processes, establish control limits based on specification limits when the fluctuation of the process mean is permitted or inevitable. For designing these charts by minimizing economic costs subject to statistical constraints, an economic-statistical model is developed in this paper. However, the parameters of some processes are in practice uncertain. Such uncertainty could be an obstacle to getting the best design. Therefore, the parameters are investigated by a robust optimization approach. For this reason, a solution procedure utilizing a genetic algorithm (GA) is presented. The algorithm procedure is illustrated based on numerical studies. Additionally, sensitivity analysis and some comparisons are carried out for more investigations. The results indicate better performance of the proposed approach in designing ACC and more reliable solutions for practitioners. | ||
| کلیدواژهها | ||
| Acceptance control chart؛ Economic-statistical design (ESD)؛ Genetic algorithm؛ Robust optimization | ||
| مراجع | ||
|
Montgomery, D. C. (2009). Introduction to Statistical Quality Control. (7th Ed.). New York: Wiley. Freund, R.A. (1957). Acceptance control charts. Journal of Industrial Quality Control, 14, 13-23. Wesolowsky, G. O. (1990). Simultaneous acceptance control charts for two correlated processes. Technometrics, 32, 43-48. Wesolowsky, G. O. (1992). Simultaneous acceptance control charts for independent processes. Journal of Applied Statistics, 41, 147-158. Steiner S. H., & Wesolowsky G. O. (1994). Simultaneous acceptance control charts for product with multiple correlate characteristics. International Journal of Production Research, 32, 531-543. Holmes, D. S., & Mergen, A. E. (2000). Exponentially weighted moving average acceptance charts. Quality and Reliability Engineering International, 16, 139-142. Chou, C. Y., Chen, C. H., & Liu, H. R. (2005). Acceptance control charts for non-normal data. Journal of Applied Statistics. 32, 25-36. Tsai, T. R., & Chiang, J. Y. (2008). The design of acceptance control chart for non-normal data. Journal of the Chinese Institute of Industrial Engineers, 25, 127-135. Taherian, T., & Balouchestani Asl, M. (2016). Capability Analysis and use of Acceptance and Control Charts in the 6-Sigma in Pharmaceutical Industries Case Study: Behestan Tolid Pharmaceutical Co. International Journal of Applied Information Systems, 11, 127-135. Duncan, A. J. (1956). The economic design of x charts used to maintain current control of a process. Journal of the American Statistical Association, 51, 228-242. Lorenzen, T. J., Vance, L. C. (1986). The economic design of control charts: a unified approach. Technometrics, 28, 3-10. Celano, G., & Fichera, S. (1999). Multiobjective economic design of an X control chart. Computers & Industrial Engineering, 37, 129-132. Mohammadian, F., & Paynabar, K. (2008). Economic design of acceptance control charts. Proceedings of the 2008 IEEE and IEEM, Singapore, 2132-2136. Saniga, E. M. (1989). Economic statistical control chart designs with an application to X and R charts. Technometrics, 31, 313-320. Amiri, A., & Jafarian-Namin, S. (2015). Evaluating multi-objective economic-statistical design of attribute C control charts for monitoring the number of non-conformities. International Journal of Quality Engineering and Technology, 5, 145-161. Naderi, M. H., Bameni Moghadam, M., & Seif, A. (2018). Economic statistical design of the T2 control chart under the Weibull shock model with multiple assignable causes. Journal of Statistical Computation and Simulation, 88, 1-27. Fallahnezhad, M. S., Shojaie-Navokh, M., & Zare-Mehrjerdi, Y. (2018). Economic-statistical design of np control chart with variable sample size and sampling interval. IJE TRANSACTIONS A: Basics, 31, 629-639. Jafarian-Namin, S., Fallahnezhad, M. S., Tavakkoli-Moghaddam, R., Salmasnia, A., & Mirzabaghi, M. (2019). Economic-statistical design of integrated model with autocorrelated data, 12th International Conference of Iranian Operations Research Society, Iran. Mohammadian, F., & Amiri, A. (2012). Economic-statistical design of acceptance control chart. Quality and Reliability Engineering International, 29, 53-61. Bertsimas, D., & Sim, M. (2004). The price of robustness. Operations Research, 52, 35-53. Safaei, A. S., Kazemzadeh, R. B., & Gan, H. S. (2015). Robust economic-statistical design of X-bar control chart. International Journal of Production Research, 53, 4446-4458. Tavakkoli-Moghaddam, R., Norouzi, N., kalami, S. M., & Salamat-bakhsh, A. (2013). Meta-heuristic algorithms theory and implementation in MATLAB (In Persian), Tehran: Islamic Azad University-South Tehran Branch. Ben-Tal, A., Boyd, S., & Nemirovski, A. (2006). Extending scope of robust optimization: comprehensive robust counterparts of uncertain problems. Mathematical Programming, 107, 63-89. Bertsimas, D., Brown, D. B., & Caramanis, C. (2011). Theory and applications of robust optimization. SIAM Review, 53, 464-501. Niaki, S. T. A., Malaki, M., & Ershadi, M. J. (2011). A comparative study of four evolutionary algorithms for economic and economic-statistical designs of MEWMA control charts. Journal of Optimization in Industrial Engineering, 9, 1-13. | ||
|
آمار تعداد مشاهده مقاله: 566 تعداد دریافت فایل اصل مقاله: 426 |
||