Ahsen, A. V. (2008). Cost-oriented failure mode and effects analysis. International Journal of Quality & Reliability Management, 25, 466-476.

Almannai, B., Greenough, R., & Kay, J. (2008). A Decision Support Tool Based on QFD and FMEA for the selection of manufacturing automation technologies. Robotics and computer integrated manufacturing, 24, 501-507.

Ashley, L., Armitage, G., Neary, M., & Hollingsworth G. (2010). A Practical Guide to Failure Mode and Effects Analysis in Health Care: Making the Most of the Team and Its Meetings. The Joint Commission Journal on Quality and Patient Safety, 36, 351-358.

Atkinson, R. M, et al. (1992). Automated fault anlaysis for hydraulic systems. Part 1. Fundamentals, in: Proceeding of the Institution of Mechanical Engineers, Part 1. J. Syst. Control Engineering, 206, 207–214.

Azienda USL Valle d'Aosta & Policlinico di Monza, (2010). "Clinical risk analysis with failure mode and effect analysis (FMEA) model in a dialysis unit." 23, 111-118. [R1] 

Ben-Daya, M. & Raouf, A. (1996). A revised failure mode and effects analysis model. International Journal of Quality and Reliability Management, 13, 43–7.

Bevilacqua, M., Braglia, M. & Gabbrielli, R. (2000). Monte Carlo simulation approach for modified FMECA in a power plant. Quality and Reliability Engineering International, 16, 313–24.

Bowles, J. B. & Pelaez, C. E. (1995). Fuzzy logic prioritization of failures in a system failure mode, effects and criticality analysis. Reliability Engineering & System Safety 50, 203–13.

Bowles, J. B. (2004). An assessment of PRN prioritization in a failure modes effects and criticality analysis. Journal of the IEST, 47, 51–6.

Braglia, M., Frosolini, M., & Montanari, R. (2003). Fuzzy criticality assessment model for failure modes and effects analysis. International Journal of Quality & Reliability Management 20, 503–24.

Braglia, M., Frosolini, M., & Montanari, R. (2003). Fuzzy TOPSIS approach for failure mode, effects and criticality analysis. Quality and Reliability Engineering International, 19, 425–43.

Braglia, M. (2000). MAFMA: multi-attribute failure mode analysis. International Journal of Quality & Reliability Management, 17, 1017–33.

Braglia, M., Fantoni, G., & Frosolini, M. (2007). The house of reliability. International Journal of Quality & Reliability Management, 24, 420-440.

Brown, D. W., Kalgren, P. W., Byington, C. S., & Roemer, M. J. (2007). Electronic prognostics – a case study using global positioning system (GPS). Microelectronics Reliability, 47, 1874–1881.

Cassanellia, G., et al (2006). Failure Analysis-assisted FMEA. Microelectronics Reliability, 46, 1795–1799.

Chang C. L., Liu P. H., & Wei, C. C. (2001). Failure mode and effects analysis using gray theory. Integrated Manufacturing Systems, 12, 211–6.

Chang, C. L., Wei, C. C., & Lee Y. H. (1999). Failure mode and effects analysis using fuzzy method and gray theory. Kybernetes, 28, 1072–80.

Charnes & Cooper, W. W. (1962). Programming with linear fractional functionals.  Naval Research Logistics Quarterly, 9, 181–186.

Charnes & Cooper, W. W. (1962). Chance-Constrained Programming. Management Science, 6, 73-79.

Charnes & Cooper, W. W. (1964). Deterministic equivalents for optimizing and satisficing under chance constraints. Operations Research, 11, 18-39.

Chen, L. H., & Weng, M.C. (2006). An evaluation approach to engineering design in QFD processes using fuzzy goal programming models. European Journal of Operational Research 172, 230–248.

Chen, L. H., & Ko, W. C. (2009). Fuzzy linear programming models for new product design using QFD with FMEA. Applied Mathematical Modeling, 33, 633-647.

Chin, K. S., Wang, Y. M., Kwai Poon, G. K., & Yang J. B. (2009). Failure modes and effects analysis using a group-based evidential reasoning approach. Computers & Operations Research, 36, 1768 – 1779.

Chin, K. S., Wang, Y. M., Yang, J. B., & Kwai, G. P. K. (2009). An evidential reasoning based approach for quality function deployment under uncertainty. Expert Systems with Applications, 36, 5684–5694.

Chin, K. S., Chan, A., & Yang, J. B. (2008). Development of a fuzzy FMEA based product design system. International Journal of Advanced Manufacturing Technology, 36, 633–649.

Colvin, R., Grunske, L., & Winter, K. (2008). Timed Behavior Trees for Failure Mode and Effects Analysis of time-critical systems. The Journal of Systems and software, 81, 2163–2182.

Dominguez-Garcia, A. D., Kassakian, J. G., & Schindall, J. E. (2006). Reliability Evaluation of the power supply of an electrical power net for safety-relevant applications. Reliability Engineering and System Safety, 91, 505–514.

Day, S., Dalto, J., Fox, J., & Turpin, M. (2006). Failure mode and effects analysis as a performance improvement tool in trauma. J Trauma Nurs, 13, 111-117.

Duwe, B., Fuchs, B. D., & Hansen-Flaschen, J. (2005). Failure Mode and effects analysis application to critical care medicine. Critical Care Clinics, 21, 21-30.

Faezy Razia, F., Danaei, A., Ehsani, A., & Dolati, C. (2013). An FMEA analysis using grey theory and grey rough sets. Decision Science Letters, 2, 299–304.

Franceschini, F., & Galetto, M. (2001). A new approach for evaluation of risk priorities for failure modes in FMEA. International Journal of Production Research, 39, 2991-3002.

Garcia, P. A. A., Juniorb, I. C. L., & Oliveira, M. A. (2013). A Weight Restricted DEA Model for FMEA risk prioritization. Produção, 23, 500-507.

Garcia, P. A. A., Schirru, R., & Frutuoso E Melo, P. F. (2005). A Fuzzy data envelopment analysis approach for FMEA. Progress in Nuclear Energy, 46, 359-373.

Gilchrist, W. (1992). Modeling failure modes and effects analysis. International Journal of Quality and Reliability Management, 10, 16–23.

Guh, Y. Y., Hon, C. C., & Lee, E. S. (2001). Fuzzy weighted average: The linear programming approach via Charnes and Cooper’s rule. Fuzzy Sets and Systems, 117, 157–160.

Hawkins, P. G., & Woollons, D. J. (1998). Failure modes and effects analysis of complex engineering systems using functional models. Artificial Intelligence in Engineering, 12, 375–397.

Hu, A. H., Hsu, C. W., Kuo, T.C., & Wu, W. C. (2009). Risk evaluation of  green components to hazardous substance using FMEA and FAHP. Expert Systems with Applications, 36, 7142-7147.

Hwang, C. L., & Masuad, A. S. M. (1973). Interactive Sequential Goal Programming. Journal of Operational Research Society, 32, 391-400.

Huang, G. Q., Nie, M., & Mak, K. L. (1999). Web-based failure mode and effect analysis (FMEA). Computers & Industrial Engineering, 37, 177-180.

Hughes, N., Chou, E., Price, C. J., & Lee, M. (1999). Automating mechanical FMEA using functional models, in: Proceedings of the Twelfth International Florida AI Research Society Conference. AAAI Press, 394–398.

Hunt, J. E., Price, C. J., Lee, & M. H. (1993). Automating the FMEA process. Intelligent Systems Engineering, 2, 119–132.

Ignizio, J. P. (1976). Goal Programming and extensions. Lexignton, Mass., Lexignton Books.

Iravani, A. (2006). Robot design optimization by using FMEA and QFD. MSc Thesis. Mechanical Engineering Department, Iran University of Science and Technology.

Kataoka, S. (1963). A Stochastic Programming Model. Econometrica, 31, 181-196.

Lee, M. H. (1999). Qualitative circuit models in failure analysis Reasoning. Artificial Intelligence, 111, 239–276.

Lee, S. M. (1979). Goal Programming methods for multiple objective integer Programs. Publication No.2 in the monograph series.

Lee, S. M. (1972). Goal Programming for Decision Analysis. Auerbach Publishers Inc., Philadelphia.

Mirghafoori, S. H., Asadian Ardakani, F., & Azizi, F. (2014). Developing a Method for Risk Analysis in Tile and Ceramic Industry Using Failure Mode and Effects Analysis by Data Envelopment Analysis. Journal of Management Studies, 7, 343-363.

Park, Y. B. (1984). The Solution of Vehicle Routing Problems in a Multiple Objective Environment. Ph.D. dissertation, Oklahoma State University, Stillwater Oklahoma, USA.

Pillay, A. & Wang, J. (2003). Modified failure mode and effects analysis using approximate reasoning. Reliability Engineering & System Safety, 79, 69–85.

Pillay, A. & Wang, J. (2003). Modified failure mode and effects analysis using approximate reasoning. Reliability Engineering & System Safety, 79, 69–85.

Pinna, T., Boccaccini, L. V., & Salavy, J. F. (2008). Failure mode and effect analysis for the   European test blanket modules. Fusion Engineering and Design, 83, 1733-1737.

Pinna, T., Caporali, R., Tesini, A. (2008). Failure Mode and Effect Analysis for remote handling transfer systems of ITER. Fusion Engineering and Design, 83, 1710-1714.

Pinna, T., Caporali, R., Cambi, G., Burgazzi, L., & Poucet, A. (1998). M.T. Porfiri, Failure mode and effect analysis on ITER heat transfer systems. Fusion Engineering and Design, 42, 431–436.

Puente, J., Pino, R., Priore, P., & de la Fuente, D. (2002). A decision support system for applying failure mode and effects analysis. International Journal of Quality & Reliability Management, 19, 137–50.

Rhee, S. J., & Ishii, K., (2003). Using cost based FMEA to enhance reliability and serviceability. Advanced Engineering Informatics, 17, 179–188.

Sankar, N. R., & Prabhu, B. S. (2001). Modified approach for prioritization of failures in a system failure mode and effects analysis. International Journal of Quality & Reliability Management, 18, 324–35.

Sengupta, J. K. (1982). Stochastic Programming, Theory and Applications. North Holand.

Seppala, Y. (1971). Constructing Sets of Uniformly Tighter Linear Approximations for Chance-Constraint Problems. Management Science, 17, 736-749.

Seppala, Y. (1971). Constructing Sets of Uniformly Tighter Linear Approximations for Chance-Constraint Problems. Management Science, 17, 736-749.

Seppala, Y. & Orpana, T. (1984). Experimental Study on the Efficiency and Accuracy of a Chance-Constrained Programming Algorithm. European Journal of Operations Research, 16, 345-357.

Shahin, A. (2004). Integration of FMEA and the Kano model: An exploratory examination.
International Journal of Quality & Reliability Management, 21, 731-746.

Sharma, R. K., Kumar, D., & Kumar, P. (2005). Systematic failure mode effect analysis (FMEA) using fuzzy linguistic modeling. International Journal of Quality & Reliability Management, 22, 986–1004.

Sharma, R. K., Kumar, D., & Kumar, P. (2007). Modeling and analyzing system failure behavior using RCA, FMEA and NHPPP models. International Journal of Quality & Reliability Management, 24, 525-546.

Stamatis, D. H. (1995). Failure Mode and Effect Analysis: FMEA from Theory to Execution. Milwaukee, Wisconsin: ASQC Quality Press.

Su, C. T. & Chou., C. J. (2008). A systematic methodology for the creation of Six Sigma projects: A case study of semiconductor foundry. Expert Systems with Applications, 34, 2693–2703.

Terry, G. J. (1991). Engineering System Safety. 2nd ed., Mechanical Engineering Publications, London.

Wang, Y. M., Chin, K. S., Poon, G. K. K., & Yang, J. B. (2009). Risk evaluation in failure mode and effects analysis using fuzzy weighted geometric mean. Expert Systems with Applications, 36, 1195–1207.

Zare Mehrjerdi, Y. (2014). Strategic system selection with linguistic preferences and grey information using MCDM. Applied Soft Computing, 18, 323-337.

Zare Mehrjerdi, Y., & Dehghanbaghi, M. (2010). An FMEA approach for new product development risk analysis. 8th international management conference, Tehran, Iran.

Zare Mehrjerdi, Y., & Dehghanbaghi, M. (2013). A Dynamic Risk Analysis on New Product Development Process. International Journal of Industrial Engineering & Production Management, 24, 17-35.

Zare Mehrjerdi, Y. (2011). Solving fractional programming problem through fuzzy goal setting and approximation, Applied Soft Computing, 11, 1735-1742

Zare Mehrjerdi, Y. (2012). Operations Research a Profit Making Tool: Does Mathematical Modeling and System Developing Really Pay? Impacts on Organizations Bottom Line. LAP publishing Company, Germany.

Zare Mehrjerdi, Y. (2015). Linear, Nonlinear, and Integer Goal Programming. Mehrjerd Publishing Company, Tehran, Iran

Zare Mehrjerdi, Y. (1986). A Goal Programming Model of the Stochastic Vehicle Routing Problem. Ph.D. Dissertation. Oklahoma State University, Stillwater, Oklahoma. USA.

Zare Mehrjerdi, Y. (1993). Planning and Development of Water Resources Systems: A Multiple Objective Approach. Second Conference on Planning and Development, Tehran. Iran

Zeleny, M. (1982). Multiple Criteria Decision Making. New York: McGraw Hill.