Development of a simulation-based optimization approach to integrate condition-based maintenance, production control and control chart design in deteriorating production processes | ||
| Journal of Quality Engineering and Production Optimization | ||
| مقاله 4، دوره 8، شماره 2، اسفند 2023، صفحه 85-118 | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22070/jqepo.2024.19061.1278 | ||
| نویسندگان | ||
| Seyed Mohammad Hadian* 1؛ Hiwa Farughi2؛ Hasan Rasay3؛ Hadi Talebi Ghadikolaei4 | ||
| 1Department of Industrial Engineering, Faculty of Engineering, University of Kurdistan, Sanandaj, Iran | ||
| 2Department of Industrial Engineering, Faculty of Engineering, University of Kurdistan,Sanandaj, Iran | ||
| 3Industrial Engineering, Kermanshah University of Technology, Kermanshah, Iran | ||
| 4Department of mathematic, Faculty of Science, Mazandaran University of Science and Technology, Behshahr, Iran | ||
| چکیده | ||
| A statistical model is proposed to schedule maintenance actions, control the inventory, and design a proper control chart in unreliable manufacturing systems. Process deterioration can lead to quality degradation and affect maintenance scheduling and production control. Integrated control of three aspects can enhance the productivity of production processes. A deteriorating manufacturing system is considered that has two states of in-control and out-of-control. Quality control of the products and process monitoring are implemented by employing a control chart. Maintenance actions are scheduled based on the machine’s condition. The duration of maintenance is considered a continuous random variable that follows a general distribution. The purpose is to schedule the maintenance tasks and control the safety stock with respect to the data collected from the control chart related to the machine condition to minimize the total cost per time unit. A Genetic algorithm (GA) is used as a solution method. Then, to reduce the solution time of the proposed GA, a Monte Carlo simulation method is presented. These two methods are combinted, and as a result a simulation-optimization technique is proposed. The performance of the model is validated by a simulation-based optimization technique. Finally, sensitivity analysis of the model is performed. | ||
| کلیدواژهها | ||
| Control chart؛ Genetic algorithm؛ Imperfect manufacturing system؛ Monte Carlo simulation؛ Preventive maintenance | ||
| مراجع | ||
|
Abouei Ardakan, M., Zeinal Hamadani, A., Sima, M., & Reihaneh, M. (2016). A hybrid model for economic design of MEWMA control chart under maintenance policies. The International Journal of Advanced Manufacturing Technology, 83, 2101-2110.
Alfieri, A., Matta, A., & Pastore, E. (2020). The time buffer approximated Buffer Allocation Problem: A row–column generation approach. Computers & Operations Research, 115, 104835.
Atashgar, K., & Adelian, F. (2023). Multivariate Statistical Process Control Using Wavelet Approach. Journal of Quality Engineering and Production Optimization, 8(1), 57-68.
Bahria N, Chelbi A, Dridi IH, Bouchriha H (2018). Maintenance and quality control integrated strategy for manufacturing systems. European journal of industrial engineering, 12, 3.
Boufellouh, R., & Belkaid, F. (2020). Bi-objective optimization algorithms for joint production and maintenance scheduling under a global resource constraint: Application to the permutation flow shop problem. Computers & Operations Research, 122, 104943.
Bouslah, B., Gharbi, A., & Pellerin, R. (2016). Integrated production, sampling quality control and maintenance of deteriorating production systems with AOQL constraint. Omega, 61, 110-126.
Bouslah, B., Gharbi, A., & Pellerin, R. (2018). Joint production, quality and maintenance control of a two-machine line subject to operation-dependent and quality-dependent failures. International Journal of Production Economics, 195, 210-226.
Chakraborty, T., Giri, B.C. (2012). Joint determination of optimal safety stocks and production policy for an imperfect production system. Applied Mathematical Modelling, 36, 712-722.
Charongrattanasakul, P., Pongpullponsak, A. (2011). Minimizing the cost of integrated systems approach to process control and maintenance model by EWMA control chart using genetic algorithm. Expert systems with applications, 38, 5178-5186.
Cheng, G. Q., Zhou, B. H., & Li, L. (2018). Integrated production, quality control and condition-based maintenance for imperfect production systems. Reliability Engineering & System Safety, 175, 251-264.
Cheng, G., & Li, L. (2020). Joint optimization of production, quality control and maintenance for serial-parallel multistage production systems. Reliability Engineering & System Safety, 204, 107146.
Dodson B, (1994). Weibull Analysis. Quality Press, Milwaukee, WI.
Duffuaa, S., Kolus, A., Al-Turki, U., & El-Khalifa, A. (2020). An integrated model of production scheduling, maintenance and quality for a single machine. Computers & Industrial Engineering, 142, 106239.
El Cadi, A. A., Gharbi, A., Dhouib, K., & Artiba, A. (2021). Joint production and preventive maintenance controls for unreliable and imperfect manufacturing systems. Journal of Manufacturing Systems, 58, 263-279.
Fakher, H. B., Nourelfath, M., & Gendreau, M. (2018). Integrating production, maintenance and quality: A multi-period multi-product profit-maximization model. Reliability Engineering & System Safety, 170, 191-201.
Fallahi, A., Azimi-Dastgerdi, A., & Mokhtari, H. (2023). A sustainable production-inventory model joint with preventive maintenance and multiple shipments for imperfect quality items. Scientia Iranica, 30(3), 1204-1223.
Gouiaa-Mtibaa, A., Dellagi, S., Achour, Z., & Erray, W. (2018). Integrated Maintenance-Quality policy with rework process under improved imperfect preventive maintenance. Reliability Engineering & System Safety, 173, 1-11.
Hadian SM, Farughi H, Rasay H (2021). A mathematical model for the joint planning of maintenance and safety stock in deteriorating imperfect manufacturing systems. Scientia Iranica, DOI: 10.24200/sci.2021.55904.4459.
Hadian SM, Farughi H, Rasay H (2023). Development of a simulation-based optimization approach to integrate the decisions of maintenance planning and safety stock determination in deteriorating manufacturing systems. Computers and industrial engineering, https://doi.org/10.1016/j.cie.2023.109132.
Hafidi, N., El Barkany, A., El Mhamedi, A., & Mahmoudi, M. (2020). Integrated planning of production and maintenance for imperfect system with subcontracting strategies. international journal of engineering business management, 12, 1847979020929783.
He, Y., Liu, F., Cui, J., Han, X., Zhao, Y., Chen, Z., ... & Zhang, A. (2019). Reliability-oriented design of integrated model of preventive maintenance and quality control policy with time-between-events control chart. Computers & Industrial Engineering, 129, 228-238.
Hopp W, Spearman ML, (1996). Factory Physics: Foundations of Manufacturing Management. Irwin, Chicago, IL.
Kang K, Subramaniam V (2018). Integrated control policy of production and preventive maintenance for a deteriorating manufacturing system. Computers and industrial engineering, 118, 266-277.
Linderman K, McKone sweet KE, Anderson JC (2005). An integrated systems approach to ptocess control and maintenance. European journal of operational research, 164, 324-340.
McWilliams, T. P. (1989). Economic control chart designs and in-control time distribution: A sensitivity study. Journal of quality technology, 21, 103–151.
Mohammdaipour, P., Farughi, H., & Rasay, H. (2022). Manufacturing Process Optimization to Increase Products Reliability by Control Charts. Journal of Quality Engineering and Production Optimization.
Montgomery DC (2009), Statistical quality control, seventh edition.
Nourelfath M, Nahas N, Ben-Daya M (2016). Integrated preventive maintenance and production decisions for imperfect processes. Reliability Engineering & System Safety, 148, 21-31.
Pandey D, Kulkarni MS, Vrat P (2011). A methodology for joint optimization for maintenance planning, process quality and production scheduling. Computers and industrial engineering, 61, 1098-1106.
Polotski V, Kenne JP, Gharbi A (2019). Joint production and maintenance optimization in flexible hybrid manufacturing–remanufacturing systems under age-dependent. International journal of production economics, 216, 239-254.
Rasay H, Fallahnezhad MS, Zaremehrjerdi Y (2019). An integrated model of statistical process control and maintenance planning for a two stage dependent process under general deterioration. European journal of industrial engineering, 13, 2, 149-177.
Rasay, H., Fallahnezhad, M. S., & Zare Mehrjerdi, Y. (2018). An integrated model for economic design of chi-square control chart and maintenance planning. Communications in Statistics-Theory and Methods, 47(12), 2892-2907.
Rasay, H., Hadian, S. M., Naderkhani, F., & Azizi, F. (2024). Optimal condition based maintenance using attribute Bayesian control chart. Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability, 238(4), 754-763.
Rasay, H., Naderkhani, F., & Azizi, F. (2022). Opportunistic maintenance integrated model for a two-stage manufacturing process. The International Journal of Advanced Manufacturing Technology, 119(11), 8173-8191.
Rasay, H., Taghipour, S., & Sharifi, M. (2022). An integrated maintenance and statistical process control model for a deteriorating production process. Reliability Engineering & System Safety, 228, 108774.
Rivera-Gómez, H., Gharbi, A., Kenné, J. P., Montaño-Arango, O., & Corona-Armenta, J. R. (2020). Joint optimization of production and maintenance strategies considering a dynamic sampling strategy for a deteriorating system. Computers & industrial engineering, 140, 106273.
Salmasnia A, Abdzadeh B, Namdar M (2017). A joint design of production run length, maintenance policy and control chart with multiple assignable causes. Journal of manufacturing systems, 42, 44-56.
Salmasnia, A., Hajihosseini, Z., Namdar, M., & Mamashli, F. (2020). A joint determination of production cycle length, maintenance policy, and control chart parameters considering time value of money under stochastic shift size. scientia iranica, 27(1), 427-447.
Salmasnia, A., Kaveie, M., & Namdar, M. (2018). An integrated production and maintenance planning model under VP-T2 Hotelling chart. Computers & Industrial Engineering, 118, 89-103.
Salmasnia, A., Kia, R., Googoonani, S., & Jafarian-Namin, S. (2024). Integration of maintenance policy and statistical process monitoring for a cascade process with multiple assignable causes and random failures. Computers & Industrial Engineering, 196, 110433.
Sharifzadegan, M., Sohrabi, T., & Jafarnejad Chaghoshi, A. (2021). Hybrid optimization of production scheduling and maintenance using mathematical programming and NSGA-II meta-heuristic method. Journal of Quality Engineering and Production Optimization, 6(2), 79-96.
Shi, L., Lv, X., He, Y., & He, Z. (2024). Optimising production, maintenance, and quality control for imperfect manufacturing systems considering timely replenishment. International Journal of Production Research, 62(10), 3504-3525.
Shojaee, M., Noori, S., Jafarian-Namin, S., Johannssen, A., & Rasay, H. (2024a). Assessing the economic-statistical performance of an attribute SVSSI-np control chart based on genetic algorithms. Computers & Industrial Engineering, 197, 110401.
Shojaee, M., Noori, S., Jafarian-Namin, S., & Johannssen, A. (2024b). Integration of production–maintenance planning and monitoring simple linear profiles via Hotelling's T2 control chart and particle swarm optimization. Computers & Industrial Engineering, 188, 109864.
Tambe, P. P., & Kulkarni, M. S. (2022). A reliability based integrated model of maintenance planning with quality control and production decision for improving operational performance. Reliability engineering & system safety, 226, 108681.
Tasias, K. A. (2022). Integrated quality, maintenance and production model for multivariate processes: A Bayesian approach. Journal of Manufacturing Systems, 63, 35-51.
Wan, Q., Zhu, M., & Qiao, H. (2023). A joint design of production, maintenance planning and quality control for continuous flow processes with multiple assignable causes. CIRP Journal of Manufacturing Science and Technology, 43, 214-226.
Wang, L., Lu, Z., & Han, X. (2019). Joint optimisation of production, maintenance and quality for batch production system subject to varying operational conditions. International Journal of Production Research, 57(24), 7552-7566.
Wang, L., Lu, Z., & Ren, Y. (2020). Joint production control and maintenance policy for a serial system with quality deterioration and stochastic demand. Reliability Engineering & System Safety, 199, 106918.
Yan, T., Lei, Y., Wang, B., Han, T., Si, X., & Li, N. (2020). Joint maintenance and spare parts inventory optimization for multi-unit systems considering imperfect maintenance actions. Reliability Engineering & System Safety, 202, 106994.
Yin H, Zhang G, Zhu H, Deng Y, He F (2015). An integrated model of statistical process control and maintenance based on the delayed monitoring. Reliability engineering and system safety, 133, 323-333. | ||
|
آمار تعداد مشاهده مقاله: 285 تعداد دریافت فایل اصل مقاله: 68 |
||