Joint decisions on inventory classification, supplier selection and production policy for a multi-item EPQ inventory system under uncertainty | ||
| Journal of Quality Engineering and Production Optimization | ||
| مقاله 10، دوره 7، شماره 2، اسفند 2022، صفحه 186-204 اصل مقاله (683.46 K) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22070/jqepo.2023.16975.1247 | ||
| نویسندگان | ||
| Fatemeh Keramati1؛ Hadi Mokhtari* 2؛ Ali Fallahi3 | ||
| 1Department of Management and Entrepreneurship, Faculty of Humanities, University of Kashan, Kashan, Iran. | ||
| 2Department of Industrial Engineering, Faculty of Engineering, University of Kashan, Kashan, Iran | ||
| 3Department of Industrial Engineering, Sharif University of Technology, Tehran, Iran | ||
| چکیده | ||
| There is a great need to improve the classical inventory models so that they can address real-world problems more properly. The presence of multiple products and a variety of inventory items have complicated the inventory control process, so companies need to classify inventory items to reduce costs. On the other hand, the supplier selection problem is important, as there may be several suppliers with different options in the market. Also, several factors impact the demand for products and cause uncertainty for this parameter. This research develops a multi-product EPQ model that simultaneously classifies products, selects the best possible supplier for each group, and determines the replenishment policy under uncertainty in demand. To solve the proposed model, we present a simulation-optimization approach. This approach uses genetic and simulated annealing metaheuristic algorithms to solve the problem. Also, there is a simulation module that helps the algorithm to evaluate the fitness function. The parameters of algorithms are tuned by employing the Taguchi method. The results are analyzed for three categories of examples. Finally, the sensitivity of the objective function to the input parameters is also analyzed. We found that the system's total cost is highly sensitive to products unit holding cost. | ||
| کلیدواژهها | ||
| Inventory Classification؛ Demand Uncertainty؛ Supplier Selection؛ Genetic Algorithm؛ Simulation Annealing Algorithm | ||
| مراجع | ||
|
Amani Bani, E., Fallahi, A., Varmazyar, M., & Fathi, M. (2022). Designing a sustainable reverse supply chain network for COVID-19 vaccine waste under uncertainty. Computers & Industrial Engineering, 174, 108808.
Asadkhani, J., Fallahi, A., & Mokhtari, H. (2022). A sustainable supply chain under VMI-CS agreement with withdrawal policies for imperfect items. Journal of Cleaner Production, 376, 134098.
Awasthi, A., Chauhan, S., Goyal, S., & Proth, J.-M. (2009). Supplier selection problem for a single manufacturing unit under stochastic demand. International Journal of Production Economics, 117(1), 229-233.
Ayatollahi, S. A., & Jafari, A. (2022). Economic order quantity model for items with imperfect quality and multiple suppliers. Journal of Industrial and Systems Engineering.
Basnet, C., & Leung, J. M. (2005). Inventory lot-sizing with supplier selection. Computers & Operations Research, 32(1), 1-14.
Bilsel, R. U., & Ravindran, A. (2011). A multiobjective chance constrained programming model for supplier selection under uncertainty. Transportation Research Part B: Methodological, 45(8), 1284-1300.
Burke, G. J., Carrillo, J. E., & Vakharia, A. J. (2009). Sourcing decisions with stochastic supplier reliability and stochastic demand. Production and operations management, 18(4), 475-484.
Chen, J.-X. (2011). Peer-estimation for multiple criteria ABC inventory classification. Computers & Operations Research, 38(12), 1784-1791.
Chen, X., Benjaafar, S., & Elomri, A. (2013). The carbon-constrained EOQ. Operations Research Letters, 41(2), 172-179.
Cheraghalikhani, A., Khoshalhan, F., & Mokhtari, H. (2019). Aggregate production planning: A literature review and future research directions. International Journal of Industrial Engineering Computations, 10(2), 309-330.
Cherif, H., & Ladhari, T. (2016). A novel multi-criteria inventory classification approach: artificial bee colony algorithm with VIKOR method. Paper presented at the International Symposium on Computer and Information Sciences.
Cherif, H., & Ladhari, T. (2017). Multiple criteria inventory classification approach based on differential evolution and electre iii. Paper presented at the Proceedings of the 16th International Conference on Hybrid Intelligent Systems (HIS 2016).
Chu, C.-W., Liang, G.-S., & Liao, C.-T. (2008). Controlling inventory by combining ABC analysis and fuzzy classification. Computers & Industrial Engineering, 55(4), 841-851.
Cook, W. D., Kress, M., & Seiford, L. M. (1996). Data envelopment analysis in the presence of both quantitative and qualitative factors. Journal of the operational research society, 47(7), 945-953.
Dobos, I., & Vörösmarty, G. (2019). Inventory-related costs in green supplier selection problems with Data Envelopment Analysis (DEA). International Journal of Production Economics, 209, 374-380.
Fallahi, A., Amani Bani, E., & Niaki, S. T. A. (2022a). A constrained multi-item EOQ inventory model for reusable items: Reinforcement learning-based differential evolution and particle swarm optimization. Expert Systems with Applications, 207, 118018.
Fallahi, A., Azimi-Dastgerdi, M., & Mokhtari, H. (2021a). A sustainable production-inventory model joint with preventive maintenance and multiple shipments for imperfect quality items. Scientia Iranica.
Fallahi, A., Mahnam, M., & Niaki, S. T. A. (2022b). Direct aperture optimization for intensity modulated radiation therapy: Two calibrated metaheuristics and liver cancer case study. International Journal of Industrial Engineering and Production Research, 33(2), 1-14.
Fallahi, A., Mahnam, M., & Niaki, S. T. A. (2022c). A discrete differential evolution with local search particle swarm optimization to direct angle and aperture optimization in IMRT treatment planning problem. Applied Soft Computing, 131, 109798.
Fallahi, A., Mokhtari, H., & Niaki, S. T. A. (2021b). Designing a closed-loop blood supply chain network considering transportation flow and quality aspects. Sustainable operations and computers, 2, 170-189.
Fallahi, A., Mousavian Anaraki, S. A., Mokhtari, H., & Niaki, S. T. A. (2022d). Blood plasma supply chain planning to respond COVID-19 pandemic: a case study. Environment, Development and Sustainability, 1-52.
Ghodsypour, S. H., & O'Brien, C. (1998). A decision support system for supplier selection using an integrated analytic hierarchy process and linear programming. International journal of production economics, 56, 199-212.
Hadi-Vencheh, A. (2010). An improvement to multiple criteria ABC inventory classification. European Journal of Operational Research, 201(3), 962-965.
Hadi-Vencheh, A., & Mohamadghasemi, A. (2011). A fuzzy AHP-DEA approach for multiple criteria ABC inventory classification. Expert Systems with Applications, 38(4), 3346-3352.
Harris, F. W. (1990). How many parts to make at once. Operations research, 38(6), 947-950.
Holland, J. H. (1992). Adaptation in natural and artificial systems: an introductory analysis with applications to biology, control, and artificial intelligence: MIT press.
Kaabi, H., Jabeur, K., & Enneifar, L. (2015). Learning criteria weights with TOPSIS method and continuous VNS for multi-criteria inventory classification. Electronic Notes in Discrete Mathematics, 47, 197-204.
Keshavarz-Ghorbani, F., & Pasandideh, S. H. R. (2022). A bi-objective non-linear approach for determining the ordering strategy for group B in ABC analysis inventory. Journal of Optimization in Industrial Engineering, 15(1), 79-92.
Keshavarz, T., Salmasi, N., & Varmazyar, M. (2015). Minimizing total completion time in the flexible flowshop sequence-dependent group scheduling problem. Annals of Operations Research, 226(1), 351-377.
Khalilpourazari, S., & Pasandideh, S. H. R. (2019). Modeling and optimization of multi-item multi-constrained EOQ model for growing items. Knowledge-Based Systems, 164, 150-162.
Kirkpatrick, S., Gelatt Jr, C. D., & Vecchi, M. P. (1983). Optimization by simulated annealing. science, 220(4598), 671-680.
Lamba, K., Singh, S. P., & Mishra, N. (2019). Integrated decisions for supplier selection and lot-sizing considering different carbon emission regulations in Big Data environment. Computers & Industrial Engineering, 128, 1052-1062.
Li, L., & Zabinsky, Z. B. (2011). Incorporating uncertainty into a supplier selection problem. International Journal of Production Economics, 134(2), 344-356.
Liao, Z., & Rittscher, J. (2007). A multi-objective supplier selection model under stochastic demand conditions. International Journal of Production Economics, 105(1), 150-159.
Memon, M. S., Lee, Y. H., & Mari, S. I. (2015). Group multi-criteria supplier selection using combined grey systems theory and uncertainty theory. Expert Systems with Applications, 42(21), 7951-7959.
Mohammaditabar, D., Ghodsypour, S. H., & O'Brien, C. (2012). Inventory control system design by integrating inventory classification and policy selection. International Journal of Production Economics, 140(2), 655-659.
Mokhtari, H., & Hasani, A. (2017). A multi-objective model for cleaner production-transportation planning in manufacturing plants via fuzzy goal programming. Journal of Manufacturing Systems, 44, 230-242.
Mokhtari, H., Hasani, A., & Fallahi, A. (2021). Multi-product constrained economic production quantity models for imperfect quality items with rework. International Journal of Industrial Engineering & Production Research, 32(2), 0-0.
Mokhtari, H., Salmasnia, A., & Fallahi, A. (2022). Economic Production Quantity Under Possible Substitution: A Scenario Analysis Approach. International Journal of Industrial Engineering, 33(1), 1-17.
Mousavi, S. M., Sadeghi, J., Niaki, S. T. A., & Tavana, M. (2016). A bi-objective inventory optimization model under inflation and discount using tuned Pareto-based algorithms: NSGA-II, NRGA, and MOPSO. Applied soft computing, 43, 57-72.
Ng, W. L. (2007). A simple classifier for multiple criteria ABC analysis. European Journal of Operational Research, 177(1), 344-353.
Park, J., Bae, H., & Bae, J. (2014). Cross-evaluation-based weighted linear optimization for multi-criteria ABC inventory classification. Computers & Industrial Engineering, 76, 40-48.
Pasandideh, S. H. R., Niaki, S. T. A., & Gharaei, A. (2015a). Optimization of a multiproduct economic production quantity problem with stochastic constraints using sequential quadratic programming. Knowledge-Based Systems, 84, 98-107.
Pasandideh, S. H. R., Niaki, S. T. A., & Nia, A. R. (2011). A genetic algorithm for vendor managed inventory control system of multi-product multi-constraint economic order quantity model. Expert Systems with Applications, 38(3), 2708-2716.
Pasandideh, S. H. R., Niaki, S. T. A., Nobil, A. H., & Cárdenas-Barrón, L. E. (2015b). A multiproduct single machine economic production quantity model for an imperfect production system under warehouse construction cost. International Journal of Production Economics, 169, 203-214.
Pasandideh, S. H. R., Niaki, S. T. A., & Sharafzadeh, S. (2013). Optimizing a bi-objective multi-product EPQ model with defective items, rework and limited orders: NSGA-II and MOPSO algorithms. Journal of Manufacturing Systems, 32(4), 764-770.
Ramanathan, R. (2006). ABC inventory classification with multiple-criteria using weighted linear optimization. Computers & operations research, 33(3), 695-700.
Razavi Hajiagha, S. H., Daneshvar, M., & Antucheviciene, J. (2021). A hybrid fuzzy-stochastic multi-criteria ABC inventory classification using possibilistic chance-constrained programming. Soft Computing, 25(2), 1065-1083.
Rezaei, J., & Davoodi, M. (2008). A deterministic, multi-item inventory model with supplier selection and imperfect quality. Applied Mathematical Modelling, 32(10), 2106-2116.
Rezaei, J., & Salimi, N. (2015). Optimal ABC inventory classification using interval programming. International Journal of Systems Science, 46(11), 1944-1952.
Rezvan, M. T., Gholami, H., & Zakerian, R. (2021). A new algorithm for solving the parallel machine scheduling problem to maximize benefit and the number of jobs processed. Journal of Quality Engineering and Production Optimization, 6(2), 115-142.
Sadeghi, A. H., Bani, E. A., & Fallahi, A. (2023a). Grey Wolf Optimizer and Whale Optimization Algorithm for Stochastic Inventory Management of Reusable Products in a two-level Supply Chain. arXiv preprint arXiv:2302.05796.
Sadeghi, A. H., Sun, Z., Fakhrabad, A. S., Arzani, H., & Handfield, R. B. (2023b). A Mixed-integer Linear Formulation for Dynamic Modified Stochastic p-Median Problem in a Competitive Supply Chain Network Design. arXiv preprint arXiv:2301.11502.
Sadeghi, H. (2019). A forecasting system by considering product reliability, POQ policy, and periodic demand. Journal of Quality Engineering and Production Optimization, 4(2), 133-148.
Sadeghi, H., Mahmoodi, A., Bashiri, B., & Golbaghi, M. (2022). An EPQ model for deteriorating products with delayed payments and shortage. Journal of Quality Engineering and Production Optimization, 7(1), 160-176.
Sadeghi, J., Niaki, S. T. A., Malekian, M. R., & Sadeghi, S. (2016). Optimising multi-item economic production quantity model with trapezoidal fuzzy demand and backordering: two tuned meta-heuristics. European Journal of Industrial Engineering, 10(2), 170-195.
Sahebi-Fakhrabad, A., Sadeghi, A. H., & Handfield, R. (2023). Evaluating State-Level Prescription Drug Monitoring Program (PDMP) and Pill Mill Effects on Opioid Consumption in Pharmaceutical Supply Chain. Paper presented at the Healthcare.
Salameh, M. K., & Jaber, M. Y. (2000). Economic production quantity model for items with imperfect quality. International journal of production economics, 64(1-3), 59-64.
Sana, S. S. (2015). An EOQ model for stochastic demand for limited capacity of own warehouse. Annals of Operations Research, 233(1), 383-399.
Scott, J., Ho, W., Dey, P. K., & Talluri, S. (2015). A decision support system for supplier selection and order allocation in stochastic, multi-stakeholder and multi-criteria environments. International Journal of Production Economics, 166, 226-237.
Taft, E. (1918). The most economical production lot. Iron Age, 101(18), 1410-1412.
Taheri-Tolgari, J., & Mirzazadeh, A. (2019). Determining Economic Order Quantity (EOQ) with Increase in a Known Price under Uncertainty through Parametric Non-Linear Programming Approach. Journal of Quality Engineering and Production Optimization, 4(1), 197-219.
Taleizadeh, A. A. (2014). An EOQ model with partial backordering and advance payments for an evaporating item. International Journal of Production Economics, 155, 185-193.
Taleizadeh, A. A., Soleymanfar, V. R., & Govindan, K. (2018). Sustainable economic production quantity models for inventory systems with shortage. Journal of cleaner production, 174, 1011-1020.
Torabi, S. A., Hatefi, S. M., & Pay, B. S. (2012). ABC inventory classification in the presence of both quantitative and qualitative criteria. Computers & Industrial Engineering, 63(2), 530-537.
Varmazyar, M., Akhavan-Tabatabaei, R., Salmasi, N., & Modarres, M. (2020). Operating room scheduling problem under uncertainty: Application of continuous phase-type distributions. IISE Transactions, 52(2), 216-235.
Varmazyar, M., & Salmasi, N. (2012). Sequence-dependent flow shop scheduling problem minimising the number of tardy jobs. International Journal of Production Research, 50(20), 5843-5858.
Zhang, J.-l., & Zhang, M.-y. (2011). Supplier selection and purchase problem with fixed cost and constrained order quantities under stochastic demand. International Journal of Production Economics, 129(1), 1-7.
Zhou, P., & Fan, L. (2007). A note on multi-criteria ABC inventory classification using weighted linear optimization. European journal of operational research, 182(3), 1488-1491. | ||
|
آمار تعداد مشاهده مقاله: 335 تعداد دریافت فایل اصل مقاله: 252 |
||