A hybrid FMEA-SD approach for behavioral analysis of factors affecting safety management and incidents in the pelletizing industry | ||
| Journal of Quality Engineering and Production Optimization | ||
| مقاله 5، دوره 6، شماره 1، مرداد 2021، صفحه 85-104 اصل مقاله (1.52 M) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22070/jqepo.2021.5273.1141 | ||
| نویسندگان | ||
| yahia zare mehrjerdi* ؛ Amir Hajimoradi | ||
| Department of Industrial Engineering, Yazd University, Yazd, Iran | ||
| چکیده | ||
| This study aimed to analyze the behavior of effective factors on safety management to reduce incidents in the pelletizing industry using FMEA and the system dynamics approach. Risk assessment for the Sechahon pelletizing plant was performed using the FMEA method. A total of 625 risks were identified, of which 286 are high-risk RPNs and need to be scrutinized. These risks were categorized according to their nature into five categories of physical, exposure to dust, ergonomics, emergencies, and psychosocial risks. The results of our study show that decreasing the number of incidents in "risk reduction scenario" leads to the reduction of risk at the early durations of the study. Hence it is a high-priority policy in comparison with others. The technology improvement scenario shows an incremental growth trend, but the current situation scenario can decrease the number of incidents. | ||
| کلیدواژهها | ||
| FMEA؛ Risk expenses؛ level of safety؛ pelletizing industry؛ system dynamics | ||
| مراجع | ||
|
Akbari M, Naghavi M, Soori H. (2006). Epidemiology of deaths from injuries in the Islamic Republic of Iran. Eastern Mediterranean Health Journal. 12(3/4), 382-90.
Christian MS, Bradley JC, Wallace JC, Burke MJ. (2009). Workplace safety: a meta-analysis of the roles of person and situation factors. J Appl Psychol.94(5):1103–27.
Dousti, H. (2014). The Consequences of Work-related Accidents", Social, Economical, Scientific and Cultural Monthly Work and Society, No. 171.
Ebrahimnejad, E., H. Gitinavard, S. Sohrabvandi, (2017)."A new extended analytical hierarchy process technique with incomplete interval-valued information for risk assessment in IT outsourcing." International Journal of Engineering 30, No. 5, 739-748.
Haqiqat, Zare Mehrjerdi, Y., and Zare Bidaki, A. (2019) Fuzzy inference system Latin hypercube simulation: An integrated hybrid model for OHS risks management, Journal of Project Management 4, 127–140.
Fathi Biranvand, A. (2017). Management of Accidents and Incidents in Building Projects with Dynamic System Approach", Third Annual Conference of Architectural, Urban and Urban Research, Urban Architecture and Architecture Institute of Safiran Rah and Mehrazi.
Gitinavard,H., S.M. Mousavi, B. Vahdani, and A. Siadat (2017). "Project safety evaluation by a new soft computing approach-based last aggregation hesitant fuzzy complex proportional assessment in construction industry." Scientia Iranica. 10.24200/SCI.2017.4439
Golzar Ragheb, S., S.M. Mousavi, H. Gitinavard, B.Vahdani (2016). Hesitant fuzzy compromise group decision-making model by considering the weight of decision-makers to assess safety risks of production projects (shipbuilding industry), Journal of Industrial Engineering Research in Production Systems Volume 4. No.7. pp. 93-103.
Griffin MA, Neal A. (2000). Perceptions of safety at work: a framework for linking safety climate to safety performance, knowledge, and motivation. J Occup Health Psychol.5 (3):347–58.
Hajimoradi, A., and Zare Mehrjerdi, Y. (2018). Behavior analysis of factors affecting safety management to reduce incidents in the pelletizing industry using the system dynamics approach (case study: Three Chah Bafgh Pellet making plant project). Master thesis. Department of industrial engineering, Yazd University.
Hamid Ghaderi, Hossein Gitinavard, Mir Saman Pishvaee (2020), A system dynamics approach to analyzing bioethanol and biodiesel supply chains: increasing bioethanol and biodiesel market shares in the USA." International Journal of Energy Technology and Policy 16, no. 1, 57-84.
Haqiqat, E. and Zare Mehrjerdi, Y. (2019). Safety risks impacts analysis on construction project objectives using a hybrid model of fuzzy expert system and Latin hyper cube sampling, Iran Occupational Health 15, pp.34-47.
Kiajordi, A. (2011). Investigating factors affecting the incidence of accidents and incidents in the small and medium-sized workshops of Mazandaran province. Labor and Society, 138, 81-90.
Mario Di Nardo, Marianna Madonna, Teresa Murino, Francesco Castagna. (2019). Modeling A Safety Management System Using System Dynamics at the Bhopal Incidental Event, industrial & manufacturing engineering, doi: 10.20944/preprints201911.0219.v1
Mohamadfam I, Zamanpour AR. (2002). The unsafe acts of workers assisting refractory of Hamedan in 2000. Scientific Journal of Hamedan University Medical Sciences. 1(23), 1-5.
Mullen J. (2004). Investigating factors that influence individual safety behavior at work. Journal of Safety Research. 35 (3):275-85.
Mutlu, N. G., & Altuntas, S. (2019). Risk analysis for occupational safety and health in the textile industry: Integration of FMEA, FTA, and BIFPET methods. International Journal of Industrial Ergonomics, 72, 222-240
Oktarina, T., & Muhardi, M. (2020, March). Patient Safety Management Re-Design by Using Hospital Failure Mode Effect Analysis (A Case Study of Assyifa Islamic Hospital Ward in Sukabumi). In 2nd Social and Humaniora Research Symposium (So Res 2019) (pp. 210-213). Atlantis Press.
Rauf, H., Moazzeni, M., & Shafei, I. (2017). Safety Management of Contractors in Event Control", 4th Crisis Management Comprehensive Conference (HSE), Tehran, Permanent Secretariat of the Conference.
Souri, H., & Mortazavi, M. (2011). Determination of High-Risk Behaviors of Employees in Relation to Health and Safety in an Automobile Complex in 2011. Journal of Arak University of Medical Sciences, 16 (3).
Sushil, S. (1993). System Dynamics for management support, Wiley Eastern, New Dehli
Taghinejad, A. (2017). Assessment of the Effect of Safety Management on Improving the Performance of Building Workshops and Providing Appropriate Strategies. Master's Degree in Civil Engineering, Engineering Tendency and Construction Management, Tabari Nonprofit Institutes of Higher Education.
Rout, B.K. and B. K. Sikdar. (2017). Hazard Identification, Risk Assessment, and Control Measures as an Effective Tool of Occupational Health Assessment of Hazardous Process in an Iron Ore Pelletizing Industry, Indian J Occup Environ Med. 21 (2): 56–76.
Sanaeinasab H. (2008). Effect of safety education based on Preesid- Procid pattern process on reducing workers, behaviors. Presenting paper at Health Promotion and Workplace Safety. Quarterly Healthy work .7:17-8.
Singh GP, Choudhary RP, Vardhan H, Aruna M, Akolkar A.B. (2015). Iron Ore Pelletization Technology and its Environmental Impact Assessment in Eastern Region of India - A Case Study. Procedia Earth Planetary Sci. 11, 582–97.
Vinodkumar MN, Bhasi M. (2010). Safety management practices and safety behaviour: assessing the mediating role of safety knowledge and motivation. Accid Anal Prev. 42 (6):2082–93.
Zagonel AA, Corbet TF. (2006). “Levels of confidence in system dynamics modeling: a pragmatic approach to assessment of dynamic models.” Proceedings of the 24th International Conference of the System Dynamics Society. Nijmegen, The Netherlands http://www.systemdynamics.org/conferences/2006/proceed/papers/ZAGON374.pdf
Zare Mehrjerdi,Y. (2017). Systems Risk Analysis Using Hierarchical Modeling, Journal of Quality Engineering and Production Optimization, Vol. 3, No. 1, PP. 27-42, 2018
Zare Mehrjerdi, Y. & M. Dehghanbaghi. (2013a). A Dynamic Risk Analysis on New Product Development Process, International Journal of Industrial Engineering & Production Research,
Zare Mehrjerdi, Y. (2012). A system dynamics approach to healthcare cost control, International Journal of Industrial Engineering & Production Research 23.
Zare Mehrjerdi, Y. (2013b). Multi-Criteria Risk-Benefit Analysis of Healthcare Management. International Journal of Industrial Engineering and Production Research, Volume 24, Number 3, pp.151-167.
Zare Mehrjerdi, Y., & Haqiqat, E. (2015). Conceptual model development using Latin Hypercube Sampling for OHS integration into project risk evaluation. International Journal of Industrial Engineering & Production Research, 26(4), 229-241.
Zare Mehrjerdi, Y., Alemzadeh, R., Hajimoradi, A. (2020). A. Dynamic Analysis of Health-Related Factors with its impacts on Economic Growth. SN Applied Sciences 2:1440 | ||
|
آمار تعداد مشاهده مقاله: 364 تعداد دریافت فایل اصل مقاله: 266 |
||