Online Fault Detection and Isolation Method Based on Belief Rule Base for Industrial Gas Turbines | ||
| Journal of Quality Engineering and Production Optimization | ||
| مقاله 4، دوره 4، شماره 2، مرداد 2019، صفحه 49-66 اصل مقاله (1.34 M) | ||
| نوع مقاله: Research Paper | ||
| شناسه دیجیتال (DOI): 10.22070/jqepo.2020.4114.1097 | ||
| نویسندگان | ||
| seyedmohammad seyedhosseini* 1؛ Mohammad Baharshahi2؛ Kamran Shahanaghi3 | ||
| 1Department of Industrial Engineering Iran University of Science and Technology Tehran/Iran | ||
| 2Department of Industrial Engineering Iran University of Science and Technology, Tehran, Iran. | ||
| 3Department of Industrial Engineering, Iran University of Science and Technology, Tehran, Iran | ||
| چکیده | ||
| Real time and accurate fault detection has attracted an increasing attention with a growing demand for higher operational efficiency and safety of industrial gas turbines as complex engineering systems. Current methods based on condition monitoring data have drawbacks in using both expert knowledge and quantitative information for detecting faults. On account of this reason, this paper proposes an online fault detection and isolation method based on belief rule base (BRB), which can deal with modeling behavior of complex systems when semi-quantitative information is available. Although it is difficult to obtain accurate and complete quantitative information, some expert knowledge can be collected and represented by a BRB, which is essentially an expert system. As such, a new BRB based diagnosis model is proposed to detect and isolate faults of the system in real-time when aiming at isolating various damages and determining the severity of each. Moreover, a recursive algorithm is developed for online updating the parameters of the fault diagnosis model. Equipped with the recursive algorithm, the proposed diagnosis model can determine the severity of fault in real-time when two types of faults are dependent and competitive. To prove its potential application, experimental results demonstrate that the proposed model can track the fault severity very well, and the faults can be diagnosed accurately in real time. Thus, R2 values of 0.99782 and 0. 99782 were obtained for the fault estimation of fouling and erosion, respectively, indicating the accurate performance of the proposed model. | ||
| کلیدواژهها | ||
| Belief rule base؛ Fault diagnosis؛ Industrial two-shaft gas turbine؛ Fouling and erosion faults | ||
|
آمار تعداد مشاهده مقاله: 261 تعداد دریافت فایل اصل مقاله: 238 |
||